Back to hardware - An old noob needs upgrade advice!
Posted: Thu May 29, 2008 6:32 pm
Hi all,
After owning an ESI-32 back in the day and also making heavy use of my mate's E6400 I, like many, went the software route with EXS24 and Mach 5 et al. However these are just sample playback programs and I soon missed the warmth of the ESI low pass and the flexibility of the EOS filters.. So the other day I managed to get an E64 with internal drive (model 6401) for ?33! Yes, 3 and 3! Shocking. It was a touch tatty with stickers on but after a soapy cloth and some TLC it shines like a champ!
Anyway, enough of my life story. My questions are what can I do with the E64? I've opened it up and the internal drive is a 240mb SCSI Apple branded drive. I didn't check the flash ram but I guess it's 1mb and the OS is at 3.0. It's also got 40mb in. So -
1 - What external SCSI CD drives does the E64 like? I've heard the more American and fruity the better...
2 - What brand internal SCSI HDDs are best for it? Can it do 9.1 or 18.2gb?
3 - As 50pin internals seem to be thin on the ground, is it ok with 80 to 50 pin adaptors (and isn't there some reverse polarity power issue?)
4 - What kind of 'bandwidth' SCSI HDDs will it take (Ultra 1, Ultra 160, Ultra 3, etc)??
5 - If I don't use an internal HDD, can I substitute that for an internal SCSI Zip?
6 - Can I go any higher than 3.0 without upgrading the CPU flash?
7 - Would it make any difference to the size of drive it can address if it were external?
8 - Is there anything I've missed to do with it (I'm not into the Synth Roms and 40mb seems ok for the moment memory wise)??
Thanks ever so much in advance!
After owning an ESI-32 back in the day and also making heavy use of my mate's E6400 I, like many, went the software route with EXS24 and Mach 5 et al. However these are just sample playback programs and I soon missed the warmth of the ESI low pass and the flexibility of the EOS filters.. So the other day I managed to get an E64 with internal drive (model 6401) for ?33! Yes, 3 and 3! Shocking. It was a touch tatty with stickers on but after a soapy cloth and some TLC it shines like a champ!
Anyway, enough of my life story. My questions are what can I do with the E64? I've opened it up and the internal drive is a 240mb SCSI Apple branded drive. I didn't check the flash ram but I guess it's 1mb and the OS is at 3.0. It's also got 40mb in. So -
1 - What external SCSI CD drives does the E64 like? I've heard the more American and fruity the better...
2 - What brand internal SCSI HDDs are best for it? Can it do 9.1 or 18.2gb?
3 - As 50pin internals seem to be thin on the ground, is it ok with 80 to 50 pin adaptors (and isn't there some reverse polarity power issue?)
4 - What kind of 'bandwidth' SCSI HDDs will it take (Ultra 1, Ultra 160, Ultra 3, etc)??
5 - If I don't use an internal HDD, can I substitute that for an internal SCSI Zip?
6 - Can I go any higher than 3.0 without upgrading the CPU flash?
7 - Would it make any difference to the size of drive it can address if it were external?
8 - Is there anything I've missed to do with it (I'm not into the Synth Roms and 40mb seems ok for the moment memory wise)??
Thanks ever so much in advance!