emusonacid!

hi guys i seen a few posts about the forum about power supply

seems mine has gone
was acting strange last few months
ie would not start alot of the time but sometimes would
now just some of the lights come on on the front and sometimes u hear floppy

i have 6400 ultra with rfx and ide 20g

any 1 know were to get power supply in uk
any 1 know were emu service centeres are in uk ?

any 1 had this prob and was it power supply ?

any help is welcome
hit me up here or find me on msn
ps i cant live without me bird help

another q
do u think the power supply from the emu xl1 would work?
just checked
the wiring is in diff order :(

Had a very similar problem and it was the flashprep disk that I ran onto my e4XT to get a nu EOS on the machine. You may not do this if you have something like 4.5 or newer (don't know the exact version).

Had my EOS reflashed and then it worked (well more or less).

aXel

If you still want to replace your PSU then you might contact http://gccomponents.co.uk/home.htm as they're a UK distributor of PowDec PSUs (you need a UPN65-32)...

Please be aware that you have to change the power connector to a Molex 09-65-2108 without mixing up the pin assignments!

Bye, Para

para how much did it cost ?

I don't know. I just did a search for PowDec products in the UK as I know which PSU is needed for the E6400U with RFX...

para wrote:If you still want to replace your PSU then you might contact http://gccomponents.co.uk/home.htm as they're a UK distributor of PowDec PSUs (you need a UPN65-32)...

Please be aware that you have to change the power connector to a Molex 09-65-2108 without mixing up the pin assignments!

Bye, Para

Aha, this has been bugging me for ages, I've had the replacement UPN65-32 psu sitting here for ages but didn't know how to connect it. Can anyone shed some light on how to change the Molex connector?

Pfew, it's been two years since I replaced mine and I'm not really longing to disassemble the whole thing again to have a look

I think I had at look at this spec sheet as well as the one for the original (sorry, don't remember the model) and reconfigured the wiring. I recommend you double check the pin assignments by measuring the voltages just to be sure...

Hope this helps,
para

The drop-in upgraded power supply for e4 Ultras is: PowDec Technologies, Inc.; 65watt; series: PTH65; model: PTH65301

http://www.powdec.com.tw/pages/pth65.htm