Page 1 of 1
Eos Link problem
Posted:
Fri Sep 12, 2008 8:21 pmby Compton Chicken
Hello all, been trying to control my E4XT Ultra over SCSI with EOS link and I'm getting the following error WnAspi32.dll not installed. I've gone on line and attempted to install it but I have no idea where to put the application extension!! I'm running Windows XP home edition & Eos 4.7. All help will be greatly appreciated.
Posted:
Sun Sep 14, 2008 6:45 pmby mfstiggall
I'm not sure, but I think you have to put the .DLL in the EOS Link application folder. It might work, because that's what you have to do when Chicken Systems Translator gives that error.
Posted:
Mon Sep 15, 2008 1:22 amby Compton Chicken
Thanks for that it's solved it! I've solved the initial problem but now the hardware wizard will not detect the software. I'm starting to think that EOS link will not detect the drivers within Windows XP does anyone have any experience of this?
Posted:
Mon Sep 15, 2008 1:33 amby Compton Chicken
Looks like this may have solved it for anyone that's interested!
http://www.tweakheadz.com/scsi_transfer ... ampler.htm
I'll try it tommorrow and report
Still problems
Posted:
Wed Sep 17, 2008 6:32 pmby Compton Chicken
Still having trouble with this sampler has drivers but Eos link wont recognise it?
Posted:
Thu Sep 18, 2008 2:54 amby kalide
I have no problems with EOSlink - however you need to make sure your termination is utterly spot on and you have no clashing ID's nor any FAT32 drives on the same SCSI bus as the master (the PC).
Read elsewhere in this forum on that issue.
M
Fat 32 formating
Posted:
Thu Sep 25, 2008 6:49 pmby Compton Chicken
Silly question I know but can anyone tell me how I establish whether my E4xt drive is formated in Fat32. I cant seem to find it?