emusonacid!

hello ya all :)

After a failed attempt to upgrade my MP7 EOS, it doesn't not boot anymore: No way to load the system or either the diagnostic menu... Nothing displayed on the screen, but it turns on as all the leds...

do you know another way to hard reset by myself (other than with diagnostic menu) or to repair the boot program???

thx so much :)

Hi there,

what has been your original OS, prior you carried out the update attempt?

In case your OS was1.17 or lower, you need to update the bootloader
first in order to read the compressed OS2.0 file. I updated from OS1.3
to OS2.0 with no problems at all.

I searched the net and the EMU manuals, but couldn't find a way to reset
your MP-7.

TSR

Addition:
Instructions:

1 - reboot XL-7/MP-7/P2500 holding down Home/Enter
2 - if you already have 1.17, skip to step 6
3 - using E-loader, download commandprep10.dli
4 - when asked to "Replace bootloader?" press enter
5 - when instructed, reboot XL-7/MP-7/P2500, again holding down Home/Enter
6 - using E-loader, download command118.dli
7 - follow prompts
8 - enjoy


http://tarekith.com/assets/CommandStati ... 3.htm#gen2