Question about turbo option card interchanging with units

Any problems with your Ultra sampler should be reported here, hopefully someone might know what's wrong.

Moderators: ezman, stu, Ole

Question about turbo option card interchanging with units

Postby Arisquad » Fri Apr 29, 2011 2:51 pm

Hello, I have two e-mu samplers, one is the esi4000 turbo and also a e5000 ultra. My question is: can I install the esi4000 turbo option card into the e5000 ultra? The ultra is running v4.61. I would be overjoyed to have s/pdif in/out on that ultra.. Any help would be appreciated.
Arisquad
 
Posts: 2
Joined: Wed Jan 19, 2011 4:05 pm

Re: Question about turbo option card interchanging with units

Postby VDS » Fri Apr 29, 2011 5:36 pm

No chance!

The Turbo Option is only for the ESI range!

Chris
The way the morning broke was quite unusual
VDS
 
Posts: 92
Joined: Mon Sep 27, 2004 9:46 pm
Location: Germany

Re: Question about turbo option card interchanging with units

Postby Arisquad » Fri Apr 29, 2011 6:15 pm

Ahh rats! Thanks for the reply!
Arisquad
 
Posts: 2
Joined: Wed Jan 19, 2011 4:05 pm

Re: Question about turbo option card interchanging with units

Postby VDS » Fri Apr 29, 2011 6:26 pm

And if you search for the D-Wam Board für the e6400 and E5000 Ultra, it is important that there is a chip which comes with the board!

There often boards on Ebay, but there are no chip included. And you need a chip, which will install on the AES7EBU socket on the Mainbaord of the Ultra!

Without this chip, the board doesn´t work!

So, ask before bidding or buying!!!

Chris
The way the morning broke was quite unusual
VDS
 
Posts: 92
Joined: Mon Sep 27, 2004 9:46 pm
Location: Germany

Re: Question about turbo option card interchanging with units

Postby mosrob » Sun May 01, 2011 9:52 am

The attached foto illustrates all parts that come with the DWAM option.

Emu 6862 DWAM.jpg
EMU 6862 DWAM Option, including the Cirrus Logic CS8411 Digital Audio Interface Receiver IC
Emu 6862 DWAM.jpg (59.58 KiB) Viewed 368 times
mosrob
 
Posts: 289
Joined: Thu Mar 04, 2010 11:32 pm
Location: Dortmund (Germany)


Return to EOS:Troubleshooting