Everything we love about Samplers from E-MU, AKAI, Ensoniq, Kurzweil, Korg, Roland, Yamaha, and all the rest.
You are not logged in.
Pages: 1
http://www.digikey.com/product-search/e … s=sw405-nd
Just successfully replaced all the tactile switches on one of my E4K's with the ones from the above link. After having spent many years with it's previous owner in a heavy smoker environment, the machine is now again almost like the day it left the shop.
Probably this switch also works with all the other E4's.
Offline
try deoxit before replacing buttons. worked well for me on similar buttons on asrx
Offline
I currently have an E5000 which is unusable due to a bad F6 button.
How difficult is it to disassemble the front panel and clean these buttons? I have had the top panel off of the sampler but have not taken apart the front panel. Is it self-explanatory or will I need a service manual to figure it out? Also if completely replacing the buttons do I need to desolder/resolder?
Thanks for any help! It would be great to use this sampler again!
Offline
its not too difficult. just spray it in the openings of the switch. if youre replacing a switch, then yes, youll need to desolder resolder. how else would you do it? hope that helped
Offline
I currently have an E5000 which is unusable due to a bad F6 button.
How difficult is it to disassemble the front panel and clean these buttons? I have had the top panel off of the sampler but have not taken apart the front panel. Is it self-explanatory or will I need a service manual to figure it out? Also if completely replacing the buttons do I need to desolder/resolder?
Thanks for any help! It would be great to use this sampler again!
You can just use a simple QWERTY keyboard, at least until you replace the switch.
Offline
assuming you have the ascii option
Offline
Which I don't. The DWAM board seems impossible to find these days.
Offline
Pages: 1
[ Generated in 0.032 seconds, 10 queries executed - Memory usage: 1.6 MiB (Peak: 1.83 MiB) ]