SCSI Adapter

For everything about the EMU sampler EXCEPT preset and cord creations.

Moderators: ezman, stu, Ole

SCSI Adapter

Postby rawdigits » Wed Sep 26, 2007 10:55 pm

Hi

I recently bought an Adaptec 2930CU which I will be running with OS9.

However..the SCSI Port on the Card doesn't fit with the cable that comes with the E4xt ultra. the cable from the sampler is like 50 pin big connector..and the card one much smaller.


Can anyone point me to the right adapter?



Greets


Christian
rawdigits
 
Posts: 25
Joined: Sun Jul 08, 2007 11:57 am

Postby Adam-V » Wed Sep 26, 2007 11:11 pm

Hi Christian,

You need to get a cable with a 50 Pin High Density connector at one end and normal 50 Pin connector at the other. One of the larger on-line computer stores in your country should be able to sort you out for one of those. I reckon you could probably even get on from Adaptec themselves.

Cheers,
Adam-V
Adam-V
 
Posts: 87
Joined: Tue Aug 09, 2005 2:58 am
Location: Melbourne, Australia

Postby rawdigits » Thu Sep 27, 2007 1:45 pm

Thanks Adam-v


I looked on the Adaptec site


For the end to the Card I need a HD50 (High Density) Connector.


Do I need for the other (e4xt) a low density 50 or 68 pin?



Hard to find these days. But I wanna be sure that I am gonna buy the right cable.


Thanks a lot.



Christian
rawdigits
 
Posts: 25
Joined: Sun Jul 08, 2007 11:57 am

Postby robr » Thu Sep 27, 2007 6:05 pm

The connector on the E-mu is a 50 pin centronics.

I'd try and get an Adaptec or Belkin cable to be sure of the quality if I was you.
robr
 
Posts: 89
Joined: Fri Sep 10, 2004 8:16 am
Location: LONDON

Postby wigworld » Thu Sep 27, 2007 6:59 pm

Where are you based, rawdigits? If it's in the UK I can probable find you one in my loft.
wigworld
 
Posts: 196
Joined: Wed Sep 17, 2003 6:35 pm

Postby rawdigits » Thu Sep 27, 2007 11:36 pm

Hi

I am located in Switzerland..thanks wigworld.. I am trying to find a cable here..should find it though..


Thanks for the infos guys!




:thumbs:
rawdigits
 
Posts: 25
Joined: Sun Jul 08, 2007 11:57 am

Postby rawdigits » Fri Sep 28, 2007 10:01 am

Hey guys!


Is this the right one?


http://catalog.belkin.com/IWCatProductP ... _Id=96403#



Greets


Christian
rawdigits
 
Posts: 25
Joined: Sun Jul 08, 2007 11:57 am

Postby jungalized » Fri Sep 28, 2007 11:20 am

hi,
this should be the right one...

btw:

could you write a little step by step guide how to transfer samples between the emu and os9.2?
it doesn't work for me..
i'm using a powermac g4 and the same scsi card..
jungalized
 
Posts: 7
Joined: Thu Oct 05, 2006 11:15 pm

Postby rawdigits » Fri Sep 28, 2007 1:34 pm

Hi


Ok. it is very hard to find. in switzerland no chance..maybe in germany


Maybe you have the PC Version of the Card..very hard to know the difference...

I have to check myself whether I bought the Mac Version..


You can use chickensys to burn a cd if you have a scsi cd rom drive..


i will write when it works..
rawdigits
 
Posts: 25
Joined: Sun Jul 08, 2007 11:57 am

Postby wigworld » Sat Sep 29, 2007 9:33 pm

That picture doesn't look like the right cable - it looks like an ordinary 25 pin SCSI connector - you need HD50. PM me your address, and I'll send you one.
wigworld
 
Posts: 196
Joined: Wed Sep 17, 2003 6:35 pm

Postby rawdigits » Sun Sep 30, 2007 7:26 pm

Thanks wigorld..i sent you a pm



Found another one, maybe this is the correct one?


http://inkpool.de/artikel/speicherkabel ... _91370029/



Greets


Christian
rawdigits
 
Posts: 25
Joined: Sun Jul 08, 2007 11:57 am


Return to EOS: The Knowledge