Hi all,
After owning an ESI-32 back in the day and also making heavy use of my mate's E6400 I, like many, went the software route with EXS24 and Mach 5 et al. However these are just sample playback programs and I soon missed the warmth of the ESI low pass and the flexibility of the EOS filters.. So the other day I managed to get an E64 with internal drive (model 6401) for ?33! Yes, 3 and 3! Shocking. It was a touch tatty with stickers on but after a soapy cloth and some TLC it shines like a champ!
Anyway, enough of my life story. My questions are what can I do with the E64? I've opened it up and the internal drive is a 240mb SCSI Apple branded drive. I didn't check the flash ram but I guess it's 1mb and the OS is at 3.0. It's also got 40mb in. So -
1 - What external SCSI CD drives does the E64 like? I've heard the more American and fruity the better...
2 - What brand internal SCSI HDDs are best for it? Can it do 9.1 or 18.2gb?
3 - As 50pin internals seem to be thin on the ground, is it ok with 80 to 50 pin adaptors (and isn't there some reverse polarity power issue?)
4 - What kind of 'bandwidth' SCSI HDDs will it take (Ultra 1, Ultra 160, Ultra 3, etc)??
5 - If I don't use an internal HDD, can I substitute that for an internal SCSI Zip?
6 - Can I go any higher than 3.0 without upgrading the CPU flash?
7 - Would it make any difference to the size of drive it can address if it were external?
8 - Is there anything I've missed to do with it (I'm not into the Synth Roms and 40mb seems ok for the moment memory wise)??
Thanks ever so much in advance!