How to change Boot Flash SIMM ?

For everything about the EMU sampler EXCEPT preset and cord creations.

Moderators: ezman, stu, Ole

How to change Boot Flash SIMM ?

Postby paulsynth » Wed Apr 27, 2011 12:40 pm

I recently buyed from USA PCBA EOS Ultra Boot Flash SIMM V1.0 and wanted some schematic to change that in my e6400 ultra, my old have a 4.02 eos and the new the 4.70, i was afraid to flash with floppy, then i prefered buy a new one. I see there are several simm inside and wanted do wrong things. Finally i can exchange my saples from and to PC :)
All good trick are allowed, thank in advance to all want reply to me
Paul
paulsynth
 
Posts: 28
Joined: Mon May 04, 2009 2:27 pm

Re: How to change Boot Flash SIMM ?

Postby paulsynth » Sun May 01, 2011 9:39 pm

No idea how to do??? :???:
paulsynth
 
Posts: 28
Joined: Mon May 04, 2009 2:27 pm

Re: How to change Boot Flash SIMM ?

Postby VDS » Sun May 01, 2011 11:20 pm

Why you don´t update with floppy to EOS 4.70?

The only thing I can write for changing the simm is, when you have opened the unit and look from the frontside into to the machine, you will see hard on the right side two simm sockets.

One of them must be the Boot Flash SIMM.

I think the old and the new one were looking identical.

So change them.....

But I can´t give you a "garantee"!

My tipp is, first make an update with a floppy......

If this fails, change the Flash Simm.....

Good Luck!

Christian
The way the morning broke was quite unusual
VDS
 
Posts: 92
Joined: Mon Sep 27, 2004 9:46 pm
Location: Germany

Re: How to change Boot Flash SIMM ?

Postby paulsynth » Mon May 02, 2011 2:08 pm

Thank you for replying my ask, after change, you think ive to do something, like reset??? I buyed a new one to have the advantage of both, i think i will update via floppy one to 4.62 and have in the other 4.70, any suggestion is welcome, i think to understand the one to change is the one display side, and near there is the 2 mb simm, ive seen some photos online and think to have seen that. The package is in milan now, and im waiting it arrive here.
I hope it wwork :)
paulsynth
 
Posts: 28
Joined: Mon May 04, 2009 2:27 pm

Re: How to change Boot Flash SIMM ?

Postby paulsynth » Fri May 06, 2011 5:11 pm

Simm is arrived today, i weared my bracelet for static charge in my laboratory, to dont damage chip, and changed it in 1 minute,like is shown in the in photo, just leave the ram and after the old boot flash and in the same reverse order mount all things back, it work very very good, i charged some good bank in SF2 format, i used extreme sample converter and proteus VX and all work very very good!!!
Welcome 4.70 to my sampler :)
I already modified my Wavestation A/D with a new led display and some resitors to made it work for 2011 and i can post some photos, (sorry for out trade) my setup for summer is ready :))) adding motif es and a korg m1r EX ;)
Attachments
infront.jpg
infront.jpg (326.91 KiB) Viewed 604 times
199266_10150148161126489_640081488_6387704_5015433_n.jpg
199266_10150148161126489_640081488_6387704_5015433_n.jpg (51.26 KiB) Viewed 602 times
188415_10150147684841489_640081488_6382100_5042863_n.jpg
188415_10150147684841489_640081488_6382100_5042863_n.jpg (60.06 KiB) Viewed 604 times
paulsynth
 
Posts: 28
Joined: Mon May 04, 2009 2:27 pm

Re: How to change Boot Flash SIMM ?

Postby E5kUltra » Sun May 08, 2011 4:40 pm

paulsynth wrote:...I already modified my Wavestation A/D with a new led display and some resitors to made it work for 2011 and i can post some photos, (sorry for out trade) my setup for summer is ready :))) adding motif es and a korg m1r EX ;)


Hey, good job on the WS A/D!
I recently put a new EL panel into my WS keyboard, but I would eventually like to put the newer LED backlit type display into it.
Did you use the Newhaven LCD unit to upgrade your A/D or a different one?
E5kUltra
 
Posts: 22
Joined: Mon May 02, 2011 5:09 pm

Re: How to change Boot Flash SIMM ?

Postby paulsynth » Sun May 08, 2011 10:32 pm

You are right, i used that one, there are other 3 different colours avalaible, but i choosed the one u see
Attachments
176812_10150148165996489_640081488_6387774_8277852_o.jpg
176812_10150148165996489_640081488_6387774_8277852_o.jpg (105.07 KiB) Viewed 570 times
paulsynth
 
Posts: 28
Joined: Mon May 04, 2009 2:27 pm


Return to EOS: The Knowledge